Fryer

A 2-chamber fryer with 2×3.5L capacity by YATO YG-04620.

The YATO fryer is an indispensable appliance in almost every food service outlet. It is designed for deep frying:

• fries,
• meat, 
• fishes ,
• croquettes,
• vegetables .

Each of the fryer's tanks has a total filling capacity of 6L. However, the minimum oil level is 2.5L and the maximum oil level is 3.5L.

Two heaters, each with a power of 2.0kW, are controlled by a potentiometer located on the control panel. It is possible to set the operating temperature in the range of 60~200℃. Installed brisproof switches allow the device to be turned off, without having to disconnect the power cord from the mains. In addition, the control panel has a protective cover made of highly durable polycarbonate, which protects the panel from oil splashing during frying. This makes keeping the fryer clean much easier. The removable heaters have the option of hanging them on special handles in a position where the dripping oil goes back into the tank. The fryer has anadditional safety device that automatically shuts off the heater when it is removed from the tank. The additional safety feature protects it from overheating, at temperatures above 260℃.

A particularly useful feature of YATO fryers is the use of the so-called "cold zone", i.e., a vent between the heater and the bottom of the tank. This feature takes advantage of the phenomenon whereby the heat generated by the heater rises upward heating the oil. On the other hand, under the heater, the temperature of the oil is lower. As a result crumbs and food scraps falling to the bottom of the tank are kept in the lower temperature oil and do not burn.

Both the housing and the lids that come with the fryer are made of high-qualitystainless steel. As a result, the fryer is quick to clean and maintain.

The fryer is also made of stainless steel

The YATO fryer has very sturdy baskets, each with a dimension of 220x130x100mm, which have a plastic, non-heating handle. Meanwhile, special hooks make it possible to hang the baskets directly over the tank, minimizing the risk of splashing oil on the work surface. This significantly increases the cleanliness of the workstation and minimizes cleaning time.

The fryer, powered by 230V~50Hz, has dimensions 425x410x290mm and weighs 9.0kg.