Fryer

A 1-chamber fryer with faucet with capacity 16L by YATO YG-04630.

The YATO fryer is an indispensable appliance in almost every food service outlet. It is designed for deep frying:

• fries,
• meat, 
• fishes ,
• cakes,
.
• vegetables,

The fryer's tank has a inch fill capacity of 16L. However, the minimum oil level is 9L and the maximum oil level is 12L.

The heater with power of 5.0kW is controlled by a potentiometer located on the control panel. It is possible to set the operating temperature in the range of 60~200℃. The installed brisproof switch allows the device to be turned off, without having to disconnect the power cord from the mains. In addition, the control panel has a protective cover made of highly durable polycarbonate, which protects the panel from oil splashing during frying. This makes keeping the fryer clean much easier. The removable heater has the option of hanging it on a special handle in a position where the dripping oil goes back into the tank. The fryer has anadditional safety device that automatically shuts off the heater when it is removed from the tank. The additional safety feature protects it from overheating, at temperatures above 260℃.

A particularly useful feature of YATO fryers is the use of the so-called "cold zone", i.e., a vent between the heater and the bottom of the tank. This feature takes advantage of the phenomenon whereby the heat generated by the heater rises upward heating the oil. On the other hand, under the heater, the temperature of the oil is lower. As a result crumbs and food scraps falling to the bottom of the tank are kept in the lower temperature oil and do not burn.

Additionally, the YATO fryer has a drain faucet that allows you to drain the oil from the tank. This is a particularly useful feature that makes oil changes very quick. In addition, it allows the old oil to be poured directly into the canister, thus minimizing the risk of spilling it.

Both the housing and the lid that comes with the fryer are made of high-qualitystainless steel. Thanks to this, the fryer is quick to clean and maintain.

The fryer is also made of stainless steel

The YATO fryer has a very sturdy basket with a dimension of 250x230x125mm, which has a plastic, non-heating handle. Meanwhile, special hooks allow the basket to be hung directly over the tank, minimizing the risk of oil splashing on the work surface. This significantly increases the cleanliness of the workstation and minimizes cleaning time.

The fryer, powered by 380~400V, has dimensions of 550x365x400mm and weighs 11.0kg.