Workshop LED battery lamp

Yato rechargeable workshop lamp with 330lm headlamp and 80lm flashlight. Equipped with a capacious 2600mAh lithium-ion battery, the model will provide a minimum of 4 hours of continuous operation. Made of durable materials, including ABS and polycarbonate, which provide IK07 mechanical protection class and IP54 waterproof rating. The rotating body, 2 hooks and 3 magnets will allow you to properly adjust the light beam.

Light source:

• diode:3.5W SMD LED + 3W POWER LED
• lumen output: 330lm headlight, 80lm flashlight
• color: 6000K

Power source:

• rechargeable battery: LI-ION 3.7V 2600mAh
• operation time: 4h
• charging time: 4h
• charging: 230V mains charger + USB cable

Building and features:

• material: ABS + rubber
• shade: polycarbonate (PC)
• rotatable body
• 2 hooks
• 2 magnets on the back of the lamp and a magnet in the base
• base.
• Impermeability class IP54
• Mechanical protection class IK07
• Dimensions: 25 x 5.5 x 4cm

ABS
characterized by very high hardness by which it is highly resistant to scratches, impacts and dents. In addition, it is resistant to the effects of various chemical agents.

IP54 -protection against access to hazardous parts by wire and protection against dust and protection against splashing water from any direction.

IK07- IK is a classification of mechanical resistance as specified in EN 62262 and IEC 62262:2002. The higher the numerical value on a scale of 0-10 , the higher the level of resistance. IK07 means resistance to an impact with an energy of 2J (in practice, an impact with a 0.5kg hammer from a height of 40cm.

Polycarbonate (PC)
is characterized by very high resistance and rigidity. Resistant to high-energy radiation, as well as UV and atmospheric factors. All this while maintaining very good light transmission.

YT-085081 is a continuation of the YT-08508 model with a new, more powerful LED and a more capacious battery. Model YT-08508 has been discontinued.