‹ 2 / 13 ›

Description

Micrometer 25
50 mm

accuracy: 0.01 mm
operating temperature: 5^oC
40^oC / 41F
104F
humidity influence: negligible below 80% relative humidity
to take precise measurements in the range from 25 to 50 mm

Preparation for work:

Clean the measuring surfaces and guide
use a cotton cloth, do not use solvents or acids
Check the zero position and, if necessary, adjust with the supplied wrench so that the line labeled "0" on the drum coincides with the horizontal line of the scale

Measuring machine

Method of measurement:

the drum can be rotated only after unlocking the locating clamp

spread the measuring surfaces to a distance slightly larger than the object to be measured

then rotate with the drum to roughly set, and then continue tightening by turning the friction clutch knob

then tighten with the drum. /li>
stop tightening when the clutch engages, that is, further rotation of the knob will not cause rotation of the drum

read the measurement result according to the measurement principle shown in the figure

It is recommended to fix the measured part or micrometer before starting the measurement. This will allow you to achieve the highest measurement accuracy.

It is also recommended that several measurements be taken so that an arithmetic average of the results can be obtained.

◀ Article Parameters In stock Price: ▶

YT-72301 Measuring range: 25-50 mm, Measurement accuracy: ±0.01 mm, Material: carbon steel|aluminum|Pvc, Din: 863, Metric scale: yes, Inch scale: no, Working temperature range: 5~40 ˚C, 17 × 9 × 3 cm, 0.369 kg Available 28.47 EUR Request

📦 sold in packs · Per pack 50 pcs

On order from the warehouse in Poland

Prices in EUR incl. VAT 21%

Recommended products