Single shock absorber with rope

Safety shock absorber YT-74236  with rope and two snap hooks is a component of the fall arrest system connecting the safety harness to the anchor point. The safety shock absorber is made of properly stitched polyester webbing. During fall arrest, the specially designed seams gradually rip, slowing the speed of the fall

• length: 1.8 m
• rope diameter: 12 mm
• two self-locking snap hooks with manual locking with maximum opening: 16 mm
• permanently connected to the safety rope

Safety shock absorber YT-74236 with rope and two snap hooks has been tested in an EU-accredited laboratory and meets the requirements of EN 355:2002.

Safety and legal aspects:

Work at height is work performed at a level more than 1 meter above ground/floor level, the surface of which is not surrounded on all sides by solid walls or a protective structure up to a height of 1.5 meters. If it is not possible to use collective protective equipment in such conditions, then the employer ordering the work should, among other things, provide personal protective equipment. Each piece of fall protection equipment should meet certain safety standards, which the manufacturer confirms only through an EU-accredited testing laboratory. Confirmation of compliance with standards first and foremost guarantees the safety of the user, but also protects both the employee and the employer from financial consequences resulting from fines imposed by the labor inspection institution.

The following is an example of this

All elements of YATO fall protection equipment have up-to-date tests confirming compliance with safety standards, and using them according to the instructions guarantees 5 years of reliable operation.

Operiod of use:

The useful life of the safety shock absorber is five years and is calculated from the first use.