Working trousers

Working pants with nine pockets, including six with a Velcro fastener and special pockets for nutrients. The main material is a mixture of cotton with polyester in the right proportions. This solution allows you to use the strengths of both materials, including Increased tear resistance and good air circulation. Triple seams were used for connections of the material in the most exposed places to tear. Basic data: material: 35% cotton, 65% polyester weight: 275 g/m² work organization: below the belt at the front multi-function pockets, including two main pockets, two sewn pockets with a Velcro fastener with a material with material with reinforced resistance to abrasion and an additional sewn pocket with a flap fastened with Velcro on the left leg, a large pocket with a flap, fastened with Velcro on the left leg sewn in a textile loop, e.g. on a hammer on the right leg, a narrow pocket made of material with reinforced resistance to abrasion, e.g. on a wallpaper knife On the back below the waist, two large pockets with a flap, fastened with Velcro, half -trimmed with material with reinforced resistance to abrasion at the waist at the front of the eyelabist with keys at the back of the belt at the back of the Velcro loop, e.g. on a rolled cable From fabric resistant to abrasion for nonsense inserts, e.g. 74595 Additional information: triple seams in places exposed to tearing, fastened with zipper and button in the waist adjustment width width at the waist with buttons on the waist on the sides on the sides, sewing tight gum meets the requirements of the regulation (EU ) 2016/425 for work clothing and category.