Miter saw

Bevel 255mm 1800w with laser for precision cutting of hardwood and laminates.

Professional bevel designed for cutting skirting boards, panels, soffit, parquet, skirting and PVC, cable trays, squared timbers, battens, etc.

It is a versatile tool designed for cutting through wood and wood-based materials. Provides precise and fast cutting through materials.

Thanks to its wide adjustability, straight and angled cutting is possible.

Features of Yato's mitre saw:

• laser cutting line indicator
• lateral supports for cutting elongated workpieces
• stable and level base with precise vertical and horizontal cutting angle adjustment
• bearing cutting blade feed
• smoothly operating tiltable blade guard integrated into the switch<
• clip integrated into the base allows safe and fast immobilization of the workpiece
• built-in  dust extraction system
• compact dimensions and a transport handle in the center of the housing ensure proper balance and ease of carrying
• disc mounting hole: 30 mm
• included dust bag

Package contents:

• bucket
• dust collection bag
• disc saw
• .workbench extensions
• workbench clamp
• workbench locking screw

Parameters:

• nominal voltage [V~]: 220
  240
• nominal power [W]: 1800
• rated rpm [min-1]: 5000
• disc saw blade: diam. Outer x clamping diameter x thickness max [mm]: 255 x 30 x 3.0
• minimum workpiece dimensions: height x length x thickness [mm]: 20 x 200 x 20
• maximum bevel cutting angle [deg.]: 45
• insulation class: II
• protection rating: IP20
• weight [kg]: 15.2

Max height x max cutting length:

• Horizontal rotation angle 0 st. / tilt angle 0 st. [mm]: 70 x 305
• horizontal rotation angle 45 deg.  / tilt angle 0 deg[mm]: 70 x 210
• horizontal rotation angle 0 st; / tilt angle 45 st. [mm]: 35 x 305
• horizontal rotation angle 45 st / tilt angle 45 st [mm]: 35 x 210

The bevel allows you to set two types of angles:

• longitudinal cutting angle: it is possible to rotate the head within +/- 45 degrees. To make it easier to set the angle of the head, the bevel has a scale with a ratchet that allows easy setting of the head in the most common angles (0; 15; 22.5; 31.6; 45 degrees)
• cross-cutting angle (bevel): it is possible to tilt the cutting head by an angle not exceeding 45 degrees. When setting the angle, you can use the scale marked on the base of the table

The bevel allows three types of cutting:

• cut, in which the head will move down
• cut, in which the lowered and locked head will move  horizontally
• plunge cut, where the head is lowered to a pre-set height, held in that position, and then moved horizontally

The cutter is equipped with a spigot that enables connection of an attached bag or external dust extraction system.