Orbital sander

Eccentric sander 450w 150mm for removing rust, putty and paint from metal, wood 4000-13000rpm

The eccentric sander is designed for sanding and smoothing wooden surfaces, paint coatings and putties.

Thanks to the disc suitable for attaching sandpaper sanding paper of different grits, versatile use of the tool is possible.

At the same time as the grinder is supplied a bag for collecting dust generated during work.

Additional information:

• High-powered sander (450W) combined with variable speed is the optimal combination for working with wood, removing rust and paint coatings
• The 150 mm diameter plate allows you to achieve a smooth surface and, for example. clean a wooden structure from a peeling layer of old paint in a short period of time
• the bearing supporting the drive shaft is embedded in a metal housing, which prevents deformation due to the effects of high temperatures inside the sander
• the adjustable auxiliary handle located on the front of the housing facilitates stable pressure on the machine and makes sanding comfortable for the user<
• the 3 m long rubber cable is soft and does not restrict the operation of the machine
• the upper part of the grinder is covered with a rubber lining
• .infinitely variable speed control is the certainty of adjusting the pace of work to the user's requirements and comfort
• the device has a connection ferrule for use with a vacuum cleaner

Parameters:

• Rated voltage [V~]: 220
  240
• Rated frequency [Hz]: 50 / 60
• rated power [W]: 450
• rated speed [min-1]: 4000
  13000
• size of abrasive disc [mm]: 150
• weight [kg]: 2.4
• insulation class: II
• protection rating: IPX0

Velcro attachment

The grinder disc allows you to change sandpaper easily and quickly thanks to the Velcro attachment.

Speed setting

The grinder has an on/off switch which can be used to control the speed of the grinder. The deeper the switch is pressed, the higher the speed of the grinder.

The knob on the switch allows you to set the depth of the switch depressed and thus the speed.

The arrows and symbols above the knob show the direction of rotation to increase speed (+ symbol) or decrease  speed (- symbol).

Additional handle

The grinder has adjustable additional handle, the position of which can be quickly changed, without additional tools. To do this, you only need to unscrew the locking screw, set the handle in the required position, and then lock the handle with the screw.

Dust collection bag

The grinder is equipped with a bag to collect dust generated during operation. The bag should be mounted on the dust extraction outlet by inserting the bag connection into the dust extraction opening of the grinder.

Instead of the bag, the grinder can be connected to an external dust extraction system, such as with an industrial vacuum cleaner.